|
|
Build Your Online Product Catalogs?
| Product Name: |
110kV Power Transformer
|
| Supply Ability: |
1000 |
| Related proudcts |
transformer, power transformer, |
| Specifications |
110kv |
| Price Term: |
FCB |
| Port of loading: |
Shanghai |
| Minimum Order |
1 |
| Unit Price: |
|
|
It is based upon advanced technologies introduced from abroad and the successful experiences of leading manufacturers both domestic and abroad. It conforms entirely with up-to-date National Standard GB1094.1~2-1996£¬GB1094.3-2003£¬GB1094.5-2003 and International Standard IEC76 commended by international electrical engin- eering committee, and are proud of the following outstanding features:
1. Low loss, and significantly energy-saving. The average no-load loss is 35% lower than prescribed by National Standard GB/T 6451-2008.
2. The core laminations are made up from high-quality cold-rolled grain-oriented silicon steel sheets with chamfered joints and without punched holes, and are stacked without the upper yoke sheets in place, so that they are effectively improved no-load upper together with lower frame.
3. Zigzag directed flow of oil are provided within the windings, so that all parts of the windings can be cooled more evenly.
4. The regulating winding is a separate winding which apart from the high voltage main winding. In this way, total ampere-turn balance between windings ; and the axial electrodynamic force during short circuit can be reduced, thus upgrading the short circuit withstand capability of the transformer as a whole.
5. The windings of one phase are assembled into an integral phase block before placing into the core.
6. The winding manufacture, winding assembly core and winding assembly work are all proceed in totally closed clean department.
7. Core frames in the form of a flat plate are used for clamping the core, and are joined together by side beams. The core and coil assembly is fixed in the tank, being positioned against the tank at six sides rigidly, so that there can be no displacement of the assembly due to i***cts during transport.
8. Transformer tanks are fabricated with steel plates wide enough so that there are no weld joints on each surface. The steel plates for tank walls are pressed into corrugated shape to increase mechanical strength and to reduce noise due to vibr |
| Company: |
Baoding Tianwei Group (Jiangsu) Wu Zhou Transformer Co.,Ltd.
|
| Contact: |
Mr. Aaron Xi |
| Address: |
No.12 West Xin Jing Road, Economic Development Zone (South area) |
| Postcode: |
271000 |
| Tel: |
86-0512-58165206 |
| Fax: |
86-0512-58260221 |
| E-mail: |
|
|
|
|
Home
